DISCLAIMER (PLEASE READ):

We highly recommend that you install this update onto a new SD Card, just so you have the original SD card available as a backup if anything goes wrong.

Built-in OctoPrint slicing is currently disabled. We’re currently working on a massive update/overhaul that I’m incredibly excited to talk about! But in the meantime, you may want to download PrusaSlicer, or hold off on updating OctoPrint if you currently rely on the built-in OctoPrint slicer.

Please contact MakerGear Customer Support with your printer’s log files if you encounter any issues!

**OctoPrint Version: 1.7.3 (**automatically updates to the latest version v1.9.x once it’s installed)

OctoPi Version: 0.18.0

This image is compatible with following Raspberry Pi models:

• 2 (It works, but it’s not fast)
• 3
• 3b
• 3b+
• 4 (2, 4, 8gb)

Downloading the Software:

• Download the 4 Gigabyte .img file:
  • https://drive.google.com/drive/folders/1C9X4YocpTXAs3WCBa5kledjkS3oQnDiX?usp=sharing
• Download/Install Raspberry Pi imager:
  • https://www.raspberrypi.org/software/

Removing the M3 Printer’s MicroSD Card:

• Lean the printer back to located and remove the four Raspberry Pi screws: